Cowl

Weather hood

A printable cowl for the Ring on your brick wall.

Loading stage

Not a box. A cowl.

Hang a weather hood over the plate you already screwed in.

Two PETG parts for the A1. Open bottom, so rain does not pool and night vision does not bounce.

Camera

60 × 60 × 97 mm body. Matches the rectangular slide-on wall plate in your photos.

Cowl

Roof plus side cheeks that stop at the lens. The default — rain, sun, no vignetting.

Field of view

The hood stays out of the advertised field of view.

Clear

Tune

Visor overhang32mm

Roof pitch14°

Roof rise16mm

Side inset8mm

How far the cheeks stop short of the lens.

Wall thickness2.4mm

Flange18mm

Masonry screw margin around the Ring plate.

Your plate

The frame is a picture-frame around the black mount. Measure that plate if you can — two minutes with a ruler — and the window will nest around the screws you already drilled.

Plate width70mm

Plate height118mm

Build

Cable notchDrain lipsSafety screw tabs

Finish

Black or dark gray PETG. Best for night vision — no IR bounce.

Window 76 mm × 124 mm

Frame 112 mm × 160 mm

Visor to wall 104 mm

Binary STL, millimetres. Drop into Bambu Studio.